|
|
| • | Heavy-duty gun trigger switch for positive electrical contact and long life. |
| • | Reinforced rubber jacket adds strength and long life to cable. |
|
|
$284.61
|
|
|
|
| • | 60 amps of power for world class performance up to 3/4" (19.0 mm) in only a 55 lb. (25 kg) package. |
| • | Patented PCT 80 torch and VORTECH™ t... |
| • | Free Ground Shipping |
|
|
$2,547.96
|
|
|
|
| • | Includes one UL approved 120V ground fault circuit interrupter duplex type receptacle and installation instructions. Replaces the factory-installed 120V duplex ... |
|
|
$77.79
|
|
|
|
| • | Choose between a wide range of both air-cooled and water-cooled torches in various amperage ranges to meet the performance needs of the professional. |
| • | Select "F" ... |
|
|
$134.21
|
|
|
|
| • | Provides convenient connection from Pro-Cut 55 to Ranger. |
|
|
$121.60
|
|
|
|
| • | Attaches between muffler and exhaust elbow. |
|
|
$66.82
|
|
|
|
| • | 5-230 amps is the widest welding range in its class. |
| • | Patented Micro-Start™ II Technology delivers extremely stable low amperage starting... |
| • | Free Ground Shipping |
|
|
$2,054.63
|
|
|
|
| • | Large Easy-Grip Handle. |
| • | Sizable Trigger is easy to use with gloved hands. |
|
|
$599.18
|
|
|
|
| • | Provides control of wire speed and gas flow. For use with CV power sources and CV Engine Drives with output contactor. |
|
|
$495.44
|
|
|
|
| • | Required for connection of SG Control Module (K488) to power source. Consists of control and electrode cables and gas line. 10 ft. (3.0m). For Lincoln engine dr... |
|
|
$264.53
|
|
|
|
| • | For stick welding. Includes 35 ft. (10.7m) 2/0 electrode cable with lug, 30 ft. (9.1m) 2/0 work cable with lugs, headshield, filter plate, work clamp and electr... |
|
|
$465.32
|
|
|
|
| • | Provides four 115V plugs rated at 20 amps each, and one dual voltage, full KVA plug rated at 115/230V, 50 amps. (Not for use with K1418-2, K1419-2 or K1616-1 CS... |
|
|
$61.85
|
|
|
|
| • | Provides four 115V plugs rated at 15 amps each, and one dual voltage, full KVA plug rated at 115/230V, 50 amps. (For CSA machines and machines with GFCI recepta... |
|
|
$56.82
|
|
|
|
| • | Portable current control provides the same dial range as the current control on the welder. Consists of a 6-pin Amphenol connector which plugs into the remote c... |
|
|
$170.83
|
|
|
|
| • | Portable current control provides the same dial range as the current control on the welder. |
| • | Consists of a 6-pin Amphenol connector which plugs into the remote c... |
|
|
$228.83
|
|
|
|
| • | Depress pedal to increase current. Depressing pedal fully achieves maximum set current. Fully raising the pedal finishes the weld and starts the Afterflow cycle... |
|
|
$260.07
|
|
|
|
| • | For stick welding. Includes 20 ft. (6.1m) #6 electrode cable with lug, 15 ft. (4.6m) #6 work cable with lugs, headshield, filter plate, work clamp, electrode ho... |
|
|
$112.77
|
|
|
|
| • | Provides 25 ft (7.6m) of remote current control for TIG welding. (6-pin plug connection). |
|
|
$212.10
|
|
|
|
| • | Drive Roll and Guide Tube Kit for feeding .068? (1.8 mm) cored wire. |
|
|
$55.82
|
|
|
|
| • | Drive Roll and Guide Tube Kit for feeding 5/64? (2.0 mm) solid or cored wire. |
|
|
$55.82
|
|
|
|
| • | Magnum® Parts Kits provide all the torch accessories you need to start welding. |
| • | Parts Kits provide collets, collet bodies, a back cap, alumina nozzles and tungst... |
|
|
$71.22
|
|