|
|
| • | This heavy duty clamp pulls one to eighteen pins with a maximum pull of 10,000 lbs. Spread your pulling force over a seven inch area. Pull out creases, pillars ... |
|
$83.68
|
|
|
|
|
| • | Self-Tightening. The bodyman’s right arm. It grabs 2 1/4” (57 mm) of metal, making it ideal for hard pulls on heavy metal or frame. Original wedge. Original str... |
|
$78.65
|
|
|
|
|
| • | One of the handiest tools in the shop for a quick pull almost anywhere. New round opening allows for pulling with a slip hook. New casting process makes for a t... |
|
$59.85
|
|
|
|
|
| • | Self-tightening. Its 1 1/2” (39 mm) throat clearance fits over a flange or frame horn, or around a lip to pull from behind. Original wedge. Original straight cu... |
|
$80.63
|
|
|
|
|
| • | New generation of Mo-Clamps. Self-tightening. Great for getting over lips or edges. Drop-forged round wedge to keep the twist out of chain, aggressive cross-hat... |
|
$68.79
|
|
|
|
|
| • | One of Mo-Clamp’s original self-tightening clamps. A must for every bodyman. 1 1/2” wide bite for aggressive pulling. Original wedge. New angled tooth design. S... |
|
$67.50
|
|
|
|
|
| • | New generation of Mo-Clamps. Self-tightening. Thin-edged nose for getting into hard-to-reach places. Drop-forged round wedge to keep twist out of chain, aggress... |
|
$63.93
|
|
|
|
|
| • | Bar holes designed for three ways of pulling, using Shackle (#4044) and Oval Loop (#4043). Clamp has recessed pockets to hold bolts stationary for easy tighteni... |
|
$156.09
|
|
|
|
|
| • | The versatile Multi-Angle Clamp permits pulling from any direction within a 180-degree arc. The multi-angle side pull plate makes two-way pulling faster and eas... |
|
$103.48
|
|
|
|
|
| • | For easy 3/8” chain connection. Another time saving tool. Specifications: Overall length: 8 3/4” (222 mm)Weight: 3 lbs. (1.36 kg)Capacity: 10 tons (9,072 kg) |
|
$35.50
|
|
|
|
|
| • | The "Twin Claw" TM self-tightening clamp is a 7 ton rated tool for very tough pulls. Made of MoClamp® Tru-Tuff, heat-treated steel alloy. The jaws and dropped f... |
|
$82.64
|
|
|
|
|
| • | The 135° Swivel Clamp provides multi-angle pulling from a single clamp. Using MoClamp's severe duty angled tooth design, this allows the drop forged round wedge... |
|
$85.18
|
|
|
|
|
| • | For hard-to-pull areas such as frame rail ends, core supports, box sides, cowls. Original straight cut tooth design. Specifications:Gripping surface: 1 1/2” wid... |
|
$99.26
|
|
|
|
|
| • | Designed to put a twist in your pull with its V-shaped gusset. There are three positions from which to pull. For use on bolt-type hinge pillars. Specifications:... |
|
$35.25
|
|
|
|
|
| • | Mo-Clamp’s G Clamp means easier pulling, with multiple pulling angles.The G Clamp has a throat opening of 4 inches allowing plenty of room to get over, around a... |
|
$94.68
|
|
|