|
|
| • | • Set allows servicing of different areas of repair that require a specialty tool due to their confined locations
• Mercedes-Benz Fan Clutch Wrench allows re... |
|
$99.19
|
|
|
|
|
| • | • Tool can be used to aid in the removal and installation of the crank bolt used on most Chrysler, Hyundai, Mazda, and GM engines.
• Aids in the removal of t... |
|
$60.29
$63.46
|
|
|
|
|
| • | • A must to properly install harmonic balancers or drive pulleys that are pressed on the crankshaft.
• Instructions included.
• Use with Cal-Van 189, Harm... |
|
$22.90
$24.11
|
|
|
|
|
| • | • Removes and installs press-on-type belt drive accessory pulleys.
• Interchangeable components to work on GM Quad 4, GM 3.1L, and Ford 4.6L
• Works with... |
|
$62.29
$65.57
|
|
|
|
|
| • | The Serpentine Belt Wrenches are designed to release the tension on spring-loaded idler pulleys. This wrench allows direct access to the tensioner without havi... |
|
$68.87
$72.49
|
|
|
|
|
| • | Puller removes balancers, pulleys and gears with taped holes. A floating swivel prevents damage to the shaft end. Four slots in the yoke allow for 2- or 3-hol... |
|
$15.83
$16.66
|
|
|
|
|
| • | Remove pressed-on alternator and power steering pulleys on late-model GM, Ford and Chrysler engines. The threaded end installs late-model GM alternator and pow... |
|
$40.09
$42.20
|
|
|
|
|
| • | • 100% coverage of all vehicles including the 3/4 Volvo
• Ratcheting GearForce technology provides exceptional access and ease of use
• Both crow foot and... |
|
$47.22
$49.71
|
|
|
|
|
| • | • This versatile kit covers most vehicles with bolt or pulleys and also newer Chrysler engines with press on pulleys requiring special pins to hold housing.
... |
|
$61.41
$64.64
|
|
|
|
|
| • | Loosen or tighten cylindrical, rectangular and odd shaped objects. Handy, self-tightening strap wrench won't slip. Works great for installing or removing timing... |
|
$19.29
$20.31
|
|
|
|
|
| • | The 45300 is equipped with the special bolts and adapters to pull the harmonic balancer cleanly without damage to the crank sensor |
| • | Order the 45350 Retrofit Kit t... |
|
$38.66
|
|
|
|
|
| • | Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Includes: (3) M8x1.25x80 bolts, (2) 3/*-16x3"... |
|
$24.70
$26.00
|
|
|
|
|
| • | The low profile design enables work in confined areas |
| • | Eliminates the need to remove the radiator to access the pulley |
|
$65.57
|
|
|
|
|
| • | • This Kit Features The Puller Hardware And Special Pulling Screws To Remove Most All Automotive Harmonic Balancers.
• The kit includes a standard harmonic b... |
|
$84.39
$88.83
|
|
|
|
|
| • | • Releases Tension on Serpentine Belts with a Spring Loaded Idler Pulley.
Used to remove and install belts on serpentine belt systems using a spring load... |
|
$41.66
$43.85
|
|
|