|
|
| • | SET INCLUDES:
• 22mm Special Tube Socket (78408-01) - Allows the strut tower retaining nut on most European vehicles to be secured, which is a critical part ... |
|
$81.32
|
|
|
|
|
| | • Designed by professional mechanics to help quickly and easily start nuts, springs and washers on connection between exhaust manifold and exhaust downpipe.
... |
|
$27.06
|
|
|
|
|
| • | 100% rubber construction. There is no wire reinforcement that can be damaged.
Kit Incldues:
• (2) 4’x3’ Hose
• (1) 6’x3" Hose
• (1) RY30 - 3" "Y" co... |
|
$166.49
|
|
|
|
|
| • | Finish: Zinc Plated |
| • | Material: Steel |
|
$14.06
|
|
|
|
|
| • | Finish: Zinc Plated |
| • | Material: Steel |
|
$14.72
|
|
|
|
|
| • | Finish: Zinc Plated |
| • | Material: Steel |
|
$17.38
|
|
|
|
|
| | • The GasLink II has been designed to provide years of reliable service while providing Bar-94 accurate gas analysis.• Equipped with a ... |
| • | Free Ground Shipping |
|
$3,435.00
|
|
|
|
|
| | • Designed for the removal and installation of oxygen sensors, oil pressure sending units, and vacuum switches.
• Provides coverage for lower profile Chrysle... |
|
$37.59
|
|
|
|
|
| • | Use tool to cut pipes 3/4" to 3" (19 to 76mm) in diameter. Fifteen blades effectively cut pipe so only 1/4 turn is needed for a complete cut. Patented, servic... |
|
$30.49
|
|
|
|
|
| • | Specially designed socket is for removal and relpacement of vacuum switches with a 7/8" hex currently found on Ford, GM, Chrysler and some import vehicles. Als... |
|
$18.15
|
|
|
|
|
| • | Four knife-edged cutting wheels cut quickly and cleanly |
| • | Can be operated with one hand |
|
$27.87
|
|
|
|
|
| • | The Lisle 32000 rounds out exhaust pipes that are crushed or bent. Also reshapes pipes bent or flared out by placing bih end over pipe. Range is 1-1/2" to 3-5/8... |
|
$26.72
|
|
|
|
|
| • | Just place the hook of the tool through the rubber mounting ring |
| • | Then pull or push to stretch until you can remove ring from the hook on muffler, pipe or frame |
|
$15.79
|
|
|
|
|
| | • Removes clamp grooves and round out pipes. Practical, rugged tool that make easy work of a tough job.• Works with wrench or impact tool• Fits 1-5/8" to 2-7/16... |
|
$27.45
|
|
|
|
|
| | • Removes clamp grooves and round out pipes. Practical, rugged tool that make easy work of a tough job.• Works with wrench or impact tool• Fits 2-3/8" to 3-1/4" |
|
$39.25
|
|
|